Headlight Restoration Kit DIY Headlamp Brightener
Headlight Restoration Kit DIY Headlamp Brightener
Headlight Restoration Kit DIY Headlamp Brightener
Headlight Restoration Kit DIY Headlamp Brightener
Previous
Next

Headlight Restoration Kit DIY Headlamp Brightener

Reference: Locobondso
€6.99
Tax included
Last items in stock

  • Helps restore clear plastic by removing haze and discoloration
  • Provides a deep clean to yellowed, hazed headlights with the use of a specially designed polish and sealant
  • Improves visibility and safety
  • One kit is intended to restore two headlight lenses. 
  • This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by restoring your own lenses. 
  • Easy, 5-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses.
Description:
  • Plastic lenses can yellow with age, reducing headlight brightness, and new lenses can be expensive. The Headlight Lens Restoration Kit lets you shine 
  • and restore plastic lenses, including headlights, taillights, fog and directional lights. By restoring clarity to the lens, the performance of the headlight 
  • is improved and the appearance of the vehicle is enhanced Now you can produce professional results with the Headlight Lens Restoration Kit. Kit
  •  includes all items necessary to perform the task except for the masking tape.
 
Electric  Polishing Kit Contains:
  • 1x Backer Pad M10 Thread+Adapter
  • 1x Masking tape
  • 1x Sponge Disc Orange
  • 1x Sponge Disc White
  • 2x Waterproof Premium Sandpaper P800   grit
  • 2x Waterproof Premium Sandpaper P1200   grit
  • 2x Waterproof Premium Sandpaper P2000 grit
  • 2x Polishing Paste 40g
  • 2x UV Protective Paste 3ml
  • 1x Instruction Manual
 
Manually Polishing Tool  Kit Contains:
  • 1x Hand Buff Tool
  • 1x Masking tape
  • 1x Sponge Disc Orange
  • 1x Sponge Disc White
  • 2x Waterproof Premium Sandpaper P800   grit
  • 2x Waterproof Premium Sandpaper P1200   grit
  • 2x Waterproof Premium Sandpaper P2000 grit
  • 2x Polishing Paste 40g
  • 2x UV Protective Paste 3ml
  • 1x Instruction Manual
 
Process:
Mask 
  • After cleaning lens with water,Protect trim and painted surfaces around the headlight lens with masking tape. 
Sand 
  • Use a grinding tool to mount the disc, Using three grits (P800,P1200,P2000) sanding disc orderly to sand away the yellowing and surface defects from lens. 
  • Replace with a new sanding disc if need and continue sanding until the yellow layer completely removed. Spray Water to the surface if it becomes dry while sanding.
Refine
  • Dispense some polishing paste (STEP 2) onto the orange sponge to polish out the remaining scratches. When the sponge becomes dry, continue by adding 
  • some polishing paste until the sand scratches have been removed and the lens is clear.
Polish and Protect 
  • Remove the masking tape and wipe the headlight lens using attached white sponge. Using UV Protective Paste (STEP 3) to polish and prevent UV damage.
Storage:
  • Products shall be ideally stored in a cool ,dry location in unopened containers at a temperature between 8-28 degree c ( 46 to 82F) unless otherwise labeled.
Locobondso
Comments (0)
No customer reviews for the moment.