Previous
Next

Headlight Restoration Kit DIY Headlamp Brightener

Reference: Locobondso
€6.99
Tax included

  • Helps restore clear plastic by removing haze and discoloration
  • Provides a deep clean to yellowed, hazed headlights with the use of a specially designed polish and sealant
  • Improves visibility and safety
  • One kit is intended to restore two headlight lenses. 
  • This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by restoring your own lenses. 
  • Easy, 5-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses.
Description:
  • Plastic lenses can yellow with age, reducing headlight brightness, and new lenses can be expensive. The Headlight Lens Restoration Kit lets you shine 
  • and restore plastic lenses, including headlights, taillights, fog and directional lights. By restoring clarity to the lens, the performance of the headlight 
  • is improved and the appearance of the vehicle is enhanced Now you can produce professional results with the Headlight Lens Restoration Kit. Kit
  •  includes all items necessary to perform the task except for the masking tape.
 
Electric  Polishing Kit Contains:
  • 1x Backer Pad M10 Thread+Adapter
  • 1x Masking tape
  • 1x Sponge Disc Orange
  • 1x Sponge Disc White
  • 2x Waterproof Premium Sandpaper P800   grit
  • 2x Waterproof Premium Sandpaper P1200   grit
  • 2x Waterproof Premium Sandpaper P2000 grit
  • 2x Polishing Paste 40g
  • 2x UV Protective Paste 3ml
  • 1x Instruction Manual
 
Manually Polishing Tool  Kit Contains:
  • 1x Hand Buff Tool
  • 1x Masking tape
  • 1x Sponge Disc Orange
  • 1x Sponge Disc White
  • 2x Waterproof Premium Sandpaper P800   grit
  • 2x Waterproof Premium Sandpaper P1200   grit
  • 2x Waterproof Premium Sandpaper P2000 grit
  • 2x Polishing Paste 40g
  • 2x UV Protective Paste 3ml
  • 1x Instruction Manual
 
Process:
Mask 
  • After cleaning lens with water,Protect trim and painted surfaces around the headlight lens with masking tape. 
Sand 
  • Use a grinding tool to mount the disc, Using three grits (P800,P1200,P2000) sanding disc orderly to sand away the yellowing and surface defects from lens. 
  • Replace with a new sanding disc if need and continue sanding until the yellow layer completely removed. Spray Water to the surface if it becomes dry while sanding.
Refine
  • Dispense some polishing paste (STEP 2) onto the orange sponge to polish out the remaining scratches. When the sponge becomes dry, continue by adding 
  • some polishing paste until the sand scratches have been removed and the lens is clear.
Polish and Protect 
  • Remove the masking tape and wipe the headlight lens using attached white sponge. Using UV Protective Paste (STEP 3) to polish and prevent UV damage.
Storage:
  • Products shall be ideally stored in a cool ,dry location in unopened containers at a temperature between 8-28 degree c ( 46 to 82F) unless otherwise labeled.
Locobondso

Data sheet

CHEMICAL
Car Care