Charging station Wallbox EV11, cable 5m, Type 2, 11 kW, black

Wallbox EV11 - charging station for electric vehicles
Connection: (230)400V AC, 50Hz, (single)3-phase
Number of charging units: 1
fixed charging cable 5m
with Type 2 connector
Max. power per charging point: 11kW (3,7kW single phase)
Charging current (max): 16A
Nominal connection power: 11kW
Protection: no
Material housing/cover: plastic/metal (similar to RAL7016)
Lockable cover
WxHxD: 248x337x124 mm
Mounting method: Wall mounting
Degree of protection: IP44
Impact strength: IK08
Ambient temperature: -25°C bis +40°C
Standards: acc. EN 61851-1, IEC 61439-7

How to use:

We recommend the following steps to connect the cable:

1.Plug in the Schuko end of the cable to the socket

2.Plug in the Type 1 end of the cable to the car’s charging socket

3.After the cable has clicked in place you are ready for the charge.

When you finish with the charging your car, disconnect the vehicle side first and then unplug the socket. Always remove the cable from the main socket when not in use.

How to store:

The charging cable is the lifeline of your electric vehicle and is important to keep it protected. Store the cable in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens place the cable in a warm and dry place for 24 hours. Avoid to leave the cable outside where the sun, wind, dust and rain can get to it. Dust and dirt will result in the cable not charging. For longevity, ensure that your charging cable is not twisted or excessively bent during the storage.

The EV portable charging cable Type 1 to schuko with control box 16A-fixed is very easy to use and store. The cable is designed for both outdoor and indoor charging and it has IP66 (Ingress Protection). This means that it has protection from dust and splash of water from any direction.